Skip to content
NATIONWIDE SHIPPING AVAILABLE ON SELECT PRODUCTS! CALL TODAY 615-988-9366 FOR A QUOTE!
NATIONWIDE SHIPPING AVAILABLE ON SELECT PRODUCTS! CALL TODAY 615-988-9366 FOR A QUOTE!

Goodman 1.5 Ton 14 SEER 80% AFEU 60,000 BTU Multi Speed Gas Furnace and Air Conditioning System

$2,307.81
SKU GSX140181 / GDS80603AN / CAPT3743D4

Product Highlights

GSX140181 / GDS80603AN / CAPT3743D4

The Goodman® brand GSX Series Air Conditioner offers energy efficiencies and operating sound levels that are among the best in the heating and cooling industry. Quality manufacturing as well as easy installation and maintenance make this unit one of the best values on the market.

DESCRIPTION

Goodman AC - The GSX140181 Goodman Air Conditioner Condenser uses the chlorine-free refrigerant R-410A to help prevent damage to the Ozone Layer. This air conditioner 1.5 TON is equipped with sound-dampening features to provide operating sound levels are among the lowest in the heating and cooling industry. Using high-quality components,the Goodman GSX140181 air conditioner condenser an be either 14 or 15 SEER depending on which indoor unit it is paired with. If it is installed with the manufacturer-recommended evaporator coil, variable speed furnace, variable speed air handler, or variable speed modular blower, and also sometimes a thermostatic expansion valve (TXV), it is a 15 SEER system. 

Please note that this product is regulated by DOE Efficiency Standards.

  • R-410A chlorine-free refrigerant
  • Factory-installed filter dryer
  • Copper tube/enhanced aluminum fin coil
  • Service valves with sweat connections and easy-access gauge ports
  • Contactor with lug connection
  • Ground lug connection
  • AHRI Certified; ETL Listed
  • Goodman brand louvered sound control top design
  • Steel louver coil guard
  • Heavy-gauge galvanized-steel cabinet
  • Baked-on powder-paint finish with 500-hour salt-spray approval
  • Top and side maintenance access
  • Single-panel access to controls with space provided for field-installed accessories
  • When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds

This unit cannot be shipped or installed in the following states: Arizona, California, Nevada, and New Mexico
Click here to see the unit that is available in these states.
For more information about state efficiency requirements, please click here.

 

SPECIFICATIONS

 

SKU GSX140181
MANUFACTURER Goodman
COOLING BTU 18,000
DECIBEL LEVEL (DBA) 71
REFRIGERANT R410A
SEER 14
COMPRESSOR STAGES Single Stage
COMPRESSOR TYPE Scroll
LIQUID LINE 3/8"
LIQUID VALVE SIZE 3/8"
SUCTION VALVE SIZE 3/4"
ELECTRICAL 208 / 230 V. 1 Phase 60 Hz
MAX BREAKER SIZE 30 amps
MIN. BREAKER SIZE 12 amps
TONNAGE 1.5 Ton
HEIGHT 27.5"
WIDTH 26"
DEPTH 26"
WEIGHT (IN LBS) 146.0000
WARRANTY 10 Years with Online Registration
RESOURCES You will need Adobe® Acrobat® Reader to view PDF documents.
SAFETY INFORMATION PROPOSITION 65 WARNING

 

DESCRIPTION

The Goodman GDS80403AN dedicated downflow gas furnace features an aluminized steel tubular heat exchanger and high-efficiency hot surface ignition system. These furnaces are run tested for heating or combination heating and cooling applications. With its heavy-gauge, reinforced, wrap-around insulated steel cabinet and durable baked enamel finish, this gas furnace can be installed in a utility room, closet, alcove, basement or attic. Not intended for use in mobile homes.

The Goodman GDS80403AN furnace has a 80% AFUE rating which means that for every every $1.00 you spend, 80 cents goes towards heating your home. 

Furnace Features

  • Corrosion-resistant, aluminized-steel furnace tubular heat exchanger
  • Designed for dedicated downflow installations
  • Energy-saving, reliable furnace hot surface ignition system with patented adaptive learning algorithm to maximize igniter life
  • Aluminized furnace steel inshot burners
  • Energy-saving PSC, multi-speed, direct drive furnace blower motor
  • Heater has quiet, corrosion-resistant induced draft blower assembly
  • Integrated furnace control with diagnostics
  • Low voltage terminal blocks
  • Multiple flame roll-out switches, blower door safety switch, outlet air-limit switch and pressure switch for proof of combustion air
  • 40VA transformer for heating and air conditioning control service
  • Combination redundant furnace gas valve and regulator
  • A rotating combustion air blower that provides the option of venting the furnace through the top, right-hand side or left-hand side
  • Completely assembled, factory run-tested furnace for heating or combination heating/cooling application
  • Heavy-gauge, reinforced, fully insulated steel cabinet with durable baked-enamel finish
  • Attractive architectural gray paint finish
  • Foil-face insulation lines the furnaces' heat exchanger compartment
  • Coil and furnace fit flush for easy installation
  • Convenient left or right connection for gas and electric service
  • This gas furnace has a removable solid-bottom block off

SPECIFICATIONS

SKU GDS80403AN
MANUFACTURER Goodman
FURNACE EFFICIENCY / AFUE 80%
HEATING BTU 40,000
BLOWER MOTOR Multi Speed - PSC
MAXIMUM CFM 1200
BURNER STAGES Single
CONFIGURATION Dedicated Downflow
EXHAUST PIPE Metal
FLUE LOCATION Top
EXHAUST FLUE REQUIREMENT Metal
FUEL TYPE Gas
ELECTRICAL 120 V. 1 Phase 60 Hz
HEIGHT 33 3/8"
WIDTH 14"
DEPTH 28"
WEIGHT (IN LBS) 120.0000
WARRANTY 10 Years with Online Registration
RESOURCES You will need Adobe® Acrobat® Reader to view PDF documents.
SAFETY INFORMATION PROPOSITION 65 WARNING

 

DESCRIPTION

The Goodman® CAPT Cased Upflow/Downflow Indoor Coils are factory installed TXV are made for split system air conditioners and heat pumps. The coil's cabinet is painted architectural gray.

Standard Features

  • Suitable for use with R-410A refrigerant
  • Mold-resistant thermoplastic drain pans feature a low water-retention desgin
  • Rifled aluminum tubing and louvered aluminum fin coils
  • Factory-installed TXV
  • AHRI Certified
  • ETL Listed

Cabinet Features

  • Galvanized-steel cabinet with leather-grain finish
  • Foil-face insulation
  • Architectural Gray paint finish
  • Split-seam front for easy access

SPECIFICATIONS

SKU CAPT3743D4
MANUFACTURER Goodman
CONFIGURATION Upflow / Downflow
LIQUID LINE 3/8"
SUCTION LINE 7/8"
TONNAGE 3 Ton to 3.5 Ton
STYLE A-Coil
HEIGHT 30"
WIDTH 24.5"
DEPTH 21"
WEIGHT (IN LBS) 75.0000
WARRANTY 10 Years with Online Registration
RESOURCES You will need Adobe® Acrobat® Reader to view PDF documents.
SAFETY INFORMATION PROPOSITION 65 WARNING